Can You Damage Concrete With a Power Washer?
With the advent of a variety of power-washers and detergents, you may be wondering if you can damage concrete with a power washer. Well, the answer is yes, although most of the detergents and disinfectants on the market are designed to damage paint or wood surfaces. The detergents used in your car wash will also cause problems, as will any other type of cleaner that you use.
Concrete is tough, but you can still damage it with a power washer. Some of these machines are so powerful that they actually tear up the concrete. You may have to get more than one washer and then you are going to need a repairman to come in and do the job for you.
So, what happens if you damage the concrete with a power washer? If the machine gets into the concrete and starts stripping away at it, you can break some concrete into pieces to make it easier for the repairmen. These pieces will probably be made from epoxy or another type of sealer and will take more than one washer to get them all to fit back together again.
Repairmen can’t always replace the concrete with a power washer that you hit with a power washer, as many concrete polishing agents are soluble in water, so they won’t dissolve after they get soaked in the cleaning fluid. They can, however, remove small pieces and then you can put the concrete back into place to finish the job.
When you have a concrete restoration job done to your home or business, make sure that you follow the manufacturer’s directions when you are cleaning the concrete and that you have it professionally finished before you lay anything on top of it. You don’t want to accidentally damage the flooring or paint and then have to redo your whole project!
You can damage concrete by using water too close to it. If you are doing a concrete floor finish, then you should never use water near the concrete floor until the job is completed, as there can be serious consequences.
Another possibility is that you can damage concrete by using a power washer without knowing it. If you have a very thick concrete wall, then the power washer you are using may be able to get right up into the wall and strip away a layer of concrete, leaving you with a hole. This could lead to problems with your electric, plumbing, fire sprinklers, or just having the room in your home to shut down.
If you are trying to clean out a basement or an area where you don’t have a lot of space for a washer, make sure that you have a bucket with you to put water in. Make sure you don’t fill the bucket with more than one gallon of water, or it may not be strong enough to handle your project.
If you have done any excavation and have a lot of hard to reach areas, then you may find yourself in a situation where you have a lot of water damage to clean up. It is better to stay out of these difficult situations than to try to clean it up and end up being disappointed by the final results.
Don’t ever use a power washer on concrete if you are trying to clean up the cracked concrete. This is because the water could actually cause permanent damage.
If you have a lot of moisture in the air, then you might want to consider using a power washer on the flooring that has a lot of dirt and grime on it. When it comes time to clean up the floor, make sure that you have the correct pressure to work with. If you use water, then it may crack your flooring and damage the tile below.
Before you make any concrete repairs to your home or business, contact a professional repairman to do the job. They can take care of many problems that you may encounter with a power washer and will be able to give you some great ideas about what to expect.